View M74HC0906_4287952.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

M74HC09
Quad 2-input and gate (open drain)
Features

HIgh Speed: tPD = 7ns (Typ.) at VCC = 6V Low power dissipation: ICC = 1A (Max.) at TA = 25C High noise immunity: VNIH = VNIL = 28 % VCC (Min.) Balanced propagation delays: tPLH tPHL Wide operating voltage range: VCC (Opr) = 2V to 6V Pin and function compatible with 74 series 09
DIP-14 SO-14
Description
The M74HC09 is an high speed CMOS Quad 2input open drain and gate fabricated with silicon gate C2MOS technology. The internal circuit is composed of 3 stages including buffer output, which enables high noise immunity and stable output. All inputs are equipped with protection circuits against static discharge and transient excess voltage.
Order codes
Part number M74HC09B1R M74HC09M1R M74HC09RM13TR Package DIP-14 SO-14 SO-14 Packaging Tube Tube Tape and reel
May 2006
Rev 2
1/13
www.st.com 13
Contents
M74HC09
Contents
1 Pin settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 1.2 Pin connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 3
Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.1 Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 5 6 7 8
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2/13
M74HC09
Pin settings
1
1.1
Pin settings
Pin connection
Figure 1. Pin connection (top through view)
1.2
Pin description
Table 1. Pin description
Pin N 1, 4, 9, 12 2, 5, 10, 13 3, 6, 8, 11 7 14 Symbol 1A to 4A 1B to 4B 1Y to 4Y GND VCC Name and function Data Inputs Data Inputs Data Outputs Ground (0V) Positive Supply Voltage
3/13
Device summary
M74HC09
2
Device summary
Figure 2. IInput and output equivalent circuit
Figure 3.
Logic diagram
Table 2. Truth table
A L L H H B L H L H Y L L L Z
Note:
Z : High Impedance
4/13
M74HC09
Maximum rating
3
Maximum rating
Stressing the device above the rating listed in the "Absolute Maximum Ratings" table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents. Table 3. Absolute maximum ratings
Symbol VCC VI VO IIK IOK IO ICC or IGND PD Tstg TL Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Current DC VCC or Ground Current Power Dissipation Storage Temperature Lead Temperature (10 sec) Parameter Value -0.5 to +7 -0.5 to VCC + 0.5 -0.5 to VCC + 0.5 20 20 25 50 500(1) -65 to +150 300 Unit V V V mA mA mA mA mW C C
1. 500mW at 65 C; derate to 300mW by 10mW/C from 65C to 85C
3.1
Recommended operating conditions
Table 4. Recommended operating conditions
Symbol VCC VI VO Top Supply Voltage Input Voltage Output Voltage Operating Temperature VCC = 2.0V tr, tf Input Rise and Fall Time VCC = 4.5V VCC = 6.0V Parameter Value 2 to 6 0 to VCC 0 to VCC -55 to 125 0 to 1000 0 to 500 0 to 400 Unit V V V C ns ns ns
5/13
Electrical characteristics
M74HC09
4
Electrical characteristics
Table 5. DC specifications
Test condition Symbol Parameter VCC (V) 2.0 4.5 6.0 2.0 4.5 6.0 2.0 Low Level Output Voltage 4.5 6.0 4.5 6.0 II Input Leakage Current Output Leakage Current Quiescent Supply Current 6.0 IO = 20A IO = 20A IO = 20A IO = 4.0mA IO = 5.2mA VI = VCC or GND VI = VIH or VIL VO = VCC or GND VI = VCC or GND 0.0 0.0 0.0 TA = 25C Min Typ Max 1.5 3.15 4.2 0.5 1.35 1.8 0.1 0.1 0.1 Value -40 to 85C -55 to 125C Unit Min 1.5 3.15 4.2 0.5 1.35 1.8 0.1 0.1 0.1 0.33 0.33 1 Max Min 1.5 3.15 4.2 0.5 1.35 1.8 0.1 0.1 0.1 0.40 0.40 1 A V V V Max
VIH
High Level Input Voltage Low Level Input Voltage
VIL
VOL
0.17 0.26 0.18 0.26 0.1
IOZ
6.0
0.5
5
10
A
ICC
6.0
1
10
20
A
6/13
M74HC09
Electrical characteristics
Table 6. AC electrical characteristics (CL = 50 pF, Input tr = tf = 6ns)
Test Condition Symbol Parameter VCC (V) tTHL Output Transition Time Propagatio n Delay Time Propagatio n Delay Time 2.0 4.5 6.0 tPLZ 2.0 4.5 6.0 tPZL 2.0 4.5 6.0 RL = 1 K RL = 1 K TA = 25C Min Typ 30 8 7 10 8 7 20 8 7 Max 75 15 13 75 15 13 75 15 13 Value -40 to 85C -55 to 125C Unit Min Max 95 19 16 95 19 16 95 19 16 Min Max 110 22 19 110 22 19 110 22 19 ns ns ns
Table 7. Capacitive characteristics
Test condition Symbol Parameter VCC (V) 5.0 5.0 TA = 25C Min Typ 5 10 Max 10 Value -40 to 85C Min Max 10 -55 to 125C Min Max 10 pF pF Unit
CIN COUT
Input Capacitance Output Capacitance Power Dissipation Capacitance (note 1)
CPD
5.0
6.5
pF
7/13
Test circuit
M74HC09
5
Test circuit
Figure 4. Test circuit
Note:
CL = 50pF or equivalent (includes jig and probe capacitance) RT = ZOUT of pulse generator (typically 50)
6
Waveforms
Figure 5. Waveform - propagation delay (f = 1MHz; 50% duty cycle)
8/13
M74HC09
Package mechanical data
7
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
9/13
Package mechanical data
M74HC09
Plastic DIP-14 MECHANICAL DATA
mm. DIM. MIN. a1 B b b1 D E e e3 F I L Z 1.27 3.3 2.54 0.050 8.5 2.54 15.24 7.1 5.1 0.130 0.100 0.51 1.39 0.5 0.25 20 0.335 0.100 0.600 0.280 0.201 1.65 TYP MAX. MIN. 0.020 0.055 0.020 0.010 0.787 0.065 TYP. MAX. inch
P001A
10/13
M74HC09
Package mechanical data
SO-14 MECHANICAL DATA
DIM. A A1 A2 B C D E e H h L k ddd 5.8 0.25 0.4 0 mm. MIN. 1.35 0.1 1.10 0.33 0.19 8.55 3.8 1.27 6.2 0.50 1.27 8 0.100 0.228 0.010 0.016 0 TYP MAX. 1.75 0.25 1.65 0.51 0.25 8.75 4.0 MIN. 0.053 0.004 0.043 0.013 0.007 0.337 0.150 0.050 0.244 0.020 0.050 8 0.004 inch TYP. MAX. 0.069 0.010 0.065 0.020 0.010 0.344 0.157
0016019D
11/13
Revision history
M74HC09
8
Revision history
Table 8. Revision history
Date 07-Aug-2001 19-May-2006 Revision 1 2 First Release New template, deleted TSSOP14 package information Changes
12/13
M74HC09
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
13/13

▲Up To Search▲

Price & Availability of M74HC0906

	To Download M74HC0906 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .